© Copyright 1999, 1997, 1996 Osmonics, Inc.
Printed in USA, P/N 1161964 Rev. D
Manufactured in the USA
TM
ORDERING INFORMATION
Type
Absolute
Cartridge
End #1
End #2
Elastomer
Micron
Length
Adapter
Adapter
Material
Rating
MFE
91 = 0.1µm
1 = 10 Inch
A = Open End
A = Open End
B = Buna-N
92 = 0.2µm
2 = 20 Inch
Gasket
Gasket
E = EPDM
94 = 0.45µm
3 = 30 Inch
B = 120 O-Ring
B = 120 O-Ring
S = Silicone
01 = 1.0µm
4 = 40 Inch
C = 213 O-Ring
C = 213 O-Ring
T = Teflon*
E = 222 O-Ring
G = Closed End
Encapsulated
F = 226 O-Ring
Cap
(Only in 222 and 226 Sizes)
J = 020 O-Ring
H = Fin Adapter
V = Viton*
Q = 222 O-Ring
Stainless Steel
Support Ring
Z = 226 O-Ring
Stainless Steel
Support Ring
APPLICATIONS
* Viton and Teflon are registered trademarks of
E.I. DuPont de Nemours and Company, Inc.
SPECIFICATIONS
Memtrex-FE filters are specifically designed for chemical and
vent filtration.Typical applications include:
Electronics Grade
Bulk Chemical
Chemical Filtration
Filtration
• High purity
• Broad chemical
compatibility
Acids, Base, and Oxidant Process Air and Gas
Filtration
Filtration
• Highly hydrophobic
• Excellent vent filter
membrane
• High air flow
Effective Filtration Area for
10-inch Equivalent
0.1, 0.2, 0.45, and 1.0µm -
6.6 ft2 (0.52 m2)
Operational Data
Maximum Rated Differential Pressure -
Forward flow - 60 psi (4.14 bar)
Reverse flow - 30 psi (2.07 bar)
Maximum Rated Operating Temperature -
180ºF (82ºC) at 10 pisd
(0.69 bar) in water
Cartridge Dimensions
(Nominal)
Outside diameter - 2.75 inches (70 mm)
Inside diameter - 1.25 inch (31 mm)
Sterilization
Autoclave at 250ºF (121ºC) -
Maximum 10 hours
Steam-in-Place at 257ºF (125ºC) -
Maximum 10 hours
Integrity Test:
Diffusional Flow (60% IPA)
0.1µm - <15 cc/min at 20 psi (1.38 bar)
0.2µm - <15 cc/min at 13 psi (0.90 bar)
0.45µm - <10 cc/min at 9 psi (0.62 bar)
1.0µm - <8 cc/min at 5 psi (0.34 bar)
PTFE Membrane
Retention data available on request.
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.
