Product description:
AG standard housings are designed for the
purification of compressed air and gases
in an industrial operation.
The housings made out of three parts
offer, due to an optimized construction,
low differential pressures at high flow
rates and are on a standard basis
equipped with an econometer and a float
type drain.
A multitude of housings with different
connections, allow to match the require-
ments of the application, e.g. the com-
pressor size.
In this product series are 14 different
housings available ranging from a nominal
volume flow of 12 cfm to 1728 cfm
(related to 100 psi (g) and 68°F).
Filter Housing AG Standard
AG Standard
The aluminum standard filter housings with econometer and float
type drain are designed for the purification of compressed air and
gases. Due to the modular design of the housings different filter
elements can be used.
inc. · · · ·
Technical alterations reserved (Date 1/99)
Technical data
Features:
Benefits:
The housings made
Installation and
out of three parts
maintenance
Acoustic alarm
Maximum safety
signal
Optimized housing
Savings in purifi-
construction for best cation costs of
flow velocity
compressed air
and gases
Materials:
Filter housing
Aluminum die cast
resp. mold cast
Screw locking ring Aluminum with
acoustic warning
signal
Differential
Econometer
pressure gauge
Drain
Float type drain
Sealing
Parting compound
free o-ring made of
Perbunan
Maximum operating pressure:
0002–0288
230 psig
Surface finish:
Polyester powder coating
Connection:
1/4” to 3” NPT
Maximum operating temperature:
Housing
250°F
Econometer +
160°F
float type
drain
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.
