Product description:
The AG-Z water separator was designed
for the purification of air and other gases
in an industrial range of applications.
The housings made out of three parts with
swirl vanes offer low differential pressures
at high flow rates.
The ultradri® is available in a superplus
version, where it will be supplied with
a electronically controlled zeroloss drain.
In this product series are 8 different
housings available ranging from a volume
flow of 70 cfm to 1400 cfm (related to
100 psig and 68°F).
Features:
The conical form of the lower filter bowl is
designed to eliminate aerosol carry over.
The turbulent free zone in the lower part of
the filter housing prevents that condensate
is carried over from the clean air out of the
wet area.
Water separator
ultradri® AG-Z
ultradri®
Water Separator
The aluminum water separator is designed for
the purification of compressed air and gases,
especially for removing free floating water.
inc. · · · ·
Technical alterations reserved (Date 1/99)
Technical data
Materials:
Housing
Aluminum
Screw locking ring
Aluminum with
acoustic warning
signal
Drain
Screw plug resp.
electronically
controlled drain
Sealing
Parting compound
free o-ring made of
Perbunan
Maximum operating temperature:
Build and approved for a operating
temperature 250°F
Connection:
1/2” to 3” NPT
Retention rate:
99% related to 10 µm
Maximum operating pressure:
0125–2250
230 psig
Surface finish:
Polyester powder coating
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.
