ultrafilter inc.   · · · · Refrigeration Compressed Air Dryer BURAN Features BURAN: Wide model range to exactly match air requirement Tried and tested unique TRISAB heat exchanger Compact and easy to install cabinets Energy efficient with low absorbed power Able to cope with part load, overload and very wet inlet air conditions Responsive to fluctuating air flow conditions Low refrigerant charge with R 134 a (Ozone depletion factor zero) environ- mentally friendly refrigerant High ambient capability up to 122° F, renowned ultratroc quality and reliability Exclusive use of CFC free insulation ultratroc worldwide service support c UL approval Technical data BURAN SD 0100 A - SD 1650 A (60 Hz-Version) Designation SD 0100 A SD 0125 A SD 0150 A SD 0175 A SD 0225 A SD 0300 A SD 0375 A SD 0450 A SD 0550 A SD 0650 A SD 0750 A SD 0850 A SD 1000 A SD 1175 A SD 1350 A SD 1500 A SD 1650 A Volume flow cfm 60 70 85 100 125 175 200 250 300 400 450 500 600 700 800 900 1000 Power consumption kW 0.46 0.48 0.58 0.62 0.83 0.98 1.15 1.2 1.44 1.5 1.68 1.8 2.16 2.52 2.88 3.24 3.48 Cooling air required cfm 470 470 470 470 470 790 790 790 1400 1400 1300 1300 1300 1200 1200 1100 1100 Air connection NPT 1" 1" 1" 1" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 2" 2" 2" 2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" 2 1/2" Condensate drain in / di 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 0,5 Weight lb 106 110 115 117 154 176 209 214 331 335 366 386 390 397 408 419 432 Mains voltage V/60 Hz 115 115 115 115 230 230 230 230 230 230 460 460 460 460 460 460 460 Explanations: Volume flow referred to the suction status of the air compressor (+ 68° F, 14,5 psi g), with compressed air inlet temperature + 100° F, operating pressure 100 psi g, ambient tem- perature + 100° F, pressure dew point + 35° F at dryer outlet according to CAGI ADF 100. Permissible ambient temperature: min. + 36° F, max. + 122° F Max. Permissible operating pressure: 232 psi g, higher pressur on request Protection class: IP 20 Sound pressure level: dB(A) < 70 Refrigerant: R 134 a The TRISAB heat exchanger The  „heart“  of  the  new  series  is formed   by   the   TRISAB   heat   exchanger package, representing a totally innovative design  concept.  It  is  characterised  by  a particularly large heat exchanger surface. This guarantees a mode of operation not affected by load. It   is   the   use   of   very   generously dimensioned flow ducts which makes the extremely    low    pressure    differences 2 1 3 8 9 7 5 4 6 T R I S A B HEAT EXCHANGER 1   Compressed-air inlet 2   Compressed-air outlet 3   Air-to-air heat exchanger 4   Refrigerant-to-air heat      exchanger 5   Refrigerant inlet 6   Refrigerant outlet 7   Condensate receiver 8   Droplet separator 9   Condensate discharge possible.   The   system   possesses   high reserves of overload tolerance. The BURAN dryers offer safe operation up to  a  max.  pressure  dew  point  of  +59°F under conti-nuous load. The unusually high degrees of separation make it unnecessary to  have  an  upstream  cyclone  separator. The condensate precipitated in the BURAN refrigeration   compressed   air   dryers   is drained without loss of compressed air and controlled in accordance with its level. Housing version 1 Housing version 2 Housing version 3 Width inch 24 24 35 Height inch 22 26 47 Depth inch 18 24 32 Dimensions W D H s l  Generously sized air-to-air heat exchanger l  Incoming compressed air precooled l  Discharged compressed air rewarmed l  High performance refrigerant-to-air heat exchanger l  Integral condensate separation l  Low pressure drop l  Corrosion resistant all aluminium construction l  CFC free insulation l  High thermal mass for wide range thermal efficiency Specifications are subject to change without notice.
Please contact Filter Products at 804-231-4646 to place an order or for more information about this product.