inc. · · · ·
Technical alterations reserved (Date 1/99)
Compressed air is led through the inlet of
the dryer (J) and across the prefilter (9).
At this stage, the air is cleaned from par-
ticles and condensate. The condensate
is removed via the condensate drain (11).
Via the lower shuttle valve (3), the air is
is led into the adsorption vessel (1), in
which the air is dried to the required
pressure dewpoint. Via the upper shuttle
valve (3), the air gets into an afterfilter
(10), in which possibly released particles
from the desiccant are retained. Via the
outlet (O), the clean and dry air is getting
into the compressed air network and to
the point of use. While one vessel is in the
drying phase (adsorption), the other vessel
is being dried again (regeneration).
A partial stream of dried air expanded to
atmospheric pressure via an orifice plate
(4) and led across the desiccant bed for
regeneration and via a solenoid valve (5)
and a silencer (6) to atmosphere.
ultratrockner
high pressure dryer
HLP-MSD 0006 to 0360,
PN 365 psig
Complete purification package with
heatless adsorption dryer,
pre-, afterfilter and condensate drain
HLP
Volume flow
Regeneration
Volume flow
Pressure loss
Prefilter
365 psig
in
air losses (average)
(min.)
initial
(Afterfilter)
cfm*
cfm
cfm
psi
MF (PE)
0006
9
0.76
8.47
1.01
03/05
0009
14
1.12
12.71
1.45
03/05
0018
28
2.24
25.41
3.04
03/05
0027
42
3.41
38.12
1.30
04/20
0036
56
4.53
50.82
2.02
04/20
0054
84
6.76
76.24
1.74
05/20
0072
112
9.06
101.65
2.46
05/20
0108
170
13.53
152.47
2.75
05/25
0144
224
18.06
203.29
3.33
05/25
0180
280
22.59
254.12
4.63
05/25
0288
448
36.12
406.59
3.76
07/30
0360
560
45.18
508.24
4.48
07/30
high pressure adsorption dryer
HLP-MSD
(Pic. as pressure
stage 1000 psig)
* related to 14.7 psi (abs) and 68 °F at intake of compressor at max. pressure and 100 °F inlet temperature into dryer
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.
