inc. · · · ·
Technical alterations reserved (Date 1/99)
Compressed air is led through the inlet of
the dryer (J) and across the prefilter (12).
At this stage, the air is cleaned from par-
ticles and condensate. The condensate is
removed via the condensate drain (14).
Via a solenoid valve (3), the air is is led
into the adsorption vessel (1), in which
the air is dried down to the required pres-
sure dewpoint. Via a non-return valve (7),
the air gets into an afterfilter (13), in
which possibly released particles from the
desiccant are retained. Via the outlet (O),
the clean and dry air is getting into the
compressed air network and to the point of
use. While one vessel is in the drying phase
(adsorption), the other vessel is being
dried again (regeneration). A partial stream
of dried air expanded to atmospheric pres-
sure via an orifice plate (8) and led across
the desiccant bed for regeneration and via
a solenoid valve (5) and a silencer (9) to
atmosphere.
ultratrockner
high pressure dryer
HLP-MSD 0006 to 0360,
PN 600 psig
Complete purification package with heatless adsorption dryer,
pre-, afterfilter and condensate drain
HLP
Volume flow
Regeneration
Volume flow
Pressure loss
Prefilter
600 psig
in
air losses (average)
(min.)
initial
(Afterfilter)
cfm*
cfm
cfm
psi
MF (PE)
0006
9
0.71
10.76
5.49
03/05
0009
14
1.06
16.12
6.22
03/05
0018
28
2.12
32.29
7.95
03/05
0027
42
3.18
48.41
6.07
04/20
0036
56
4.24
64.53
6.80
04/20
0054
84
6.35
96.82
6.51
04/20
0072
112
8.47
129.06
7.37
05/20
0108
170
12.71
193.59
7.52
05/25
0144
224
16.94
258.18
8.24
05/25
0180
280
21.18
322.71
9.69
05/25
0288
448
33.88
516.29
8.68
07/30
0360
560
42.35
645.35
9.69
07/30
high pressure
adsorption dryer
HLP-MSD
(Pic. as pressure
stage PN 1000 psig)
* related to 14.7 psi (abs) and 68 °F at intake of compressor at max. pressure and 100 °F inlet temperature into dryer
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.
