inc. · · · ·
Technical alterations reserved (Date 1/99)
Product description:
P-EG filter housings have been developed
for the purification of compressed air and
other technical gases in industrial ranges
of application. Optimized construction
offers low differential pressure at high
flow rates.
Numerous different sizes of housings with
various connections make it possible to
adopt the filter system to exactly the
needed requirements. In this product
series there are 18 different sizes of
housings for operating volume flows of
50 to 13.640 scfm related to 100 psig
available.
The ultrafilter plug connection guarantees
that the elements remain safely fixed at all
times. Due to the modular design different
element types can be installed into the
housing. That means, even if the demands
change, ultrafilter will adapt.
Stainless steel gas filter housing in industrial quality.
P-EG stainless steel
housing
Technical data
Materials:
Filter housings:
stainless steel 304 or
316L
Clamp:
stainless steel 304
Plug:
stainless steel 304
Housing gasket: EPDM
(other gaskets
on request)
Maximum operating pressure:
0006–0192
230 psi
0288
175 psi
0432–1920
150 psi
Maximum operating temperature:
Depends on the gasket of the housing,
up to 400 °F
Surface finish:
inner:
0006–0288
pickled and passivated
Ra 40 µinch
0432–1920 pickled and passivated
Ra 40 µinch
outer:
0006–0288
pickled, passivated, and po-
lished Ra 40 µinch
0432–1920 pickled and passivated
Ra 40 µinch
Connection types:
NPT thread connection
(standard for 0006–0288 single housing)
ANSI flange (standard starting at 0432;
optional up to 0192)
Weld ends, BSP, DIN-flange or other
connections and bigger housings are avai-
lable on request
Stainless steel
housing P-EG –
industrial quality
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.
