inc. · · · ·
Technical alterations reserved (Date 1/99)
Technical data
Materials:
Membrane:
Polyethersulfone
Upstream support:
Polypropylene
Downstream support:
Polypropylene
Outer guard:
Polypropylene
Endcaps:
Polypropylene
O-Rings:
EPDM
Absolute retention rates:
0.2 µm, 0.45 µm
Integrity testing
(wetting agent water):
Pore size
Bubble point
0.2 µm
³ 44 psi
0.45 µm
³ 32 psi
Sterilization:
c In-line sterilization with slow speed
saturated steam
250°F – 275°F
for 30–60 minutes
c Autoclave
260°F for 30 minutes
ultrasulfomem® filter elements are capable
of repeated sterilization cycles – without
loss of integrity
Maximum differential pressure:
Operating temp.
Differential pressure
[°F]
[psid]
100
80
150
60
180
30
Dimensions:
Diameter:
23/4”
Length:
10”, 20”, 30” or 40”
Filtration surface:
7.3 ft2 per 10” element (10/30)
Bacterial retention:
HIMA challenge per ASTM
0.2 µm
Brevundimonas diminuta
0.45 µm
Serratia marcescens
Flow rate of a 10’’ P-PF-BEV element – water
0
5
10
15
20
25
30
35
0
2
4
6
8
10
0
100
200
300
mbar
4.35
2.90
1.45
0
psid
Volume flow
40l/min
GPM
Benefits:
Precise particle retention at rated level, meets
bacterial validation per HIMA standards
Higher flow rate, greater through-put, extended service
life
Allows faster processing times, smaller filtration
systems, reduced operating costs
Inherently water solent in aqueous solutions without use
of additives, surface active agents or post-treatments
Assurance of product integrity and effectiveness in
operation
Reliable integrity under severe process conditions,
withstands prolonged exposure to high temperature
water without breakdown, shedding or loss of integrity
Compatible with chemical sanitization methods
Compatible with autoclave and in-line steam steriliza-
tion, withstands multiple sterilizations
Meets FDA requirements for food contact, passed USP
Class VI biological tests for plastics
Low protein binding, minimizes valuable product
adsorption, increase yield
Assured product reliability and consistency
Features:
Absolute ratings of 0.2 µm,
0.45 µm
Highly porous asymmetric
membrane
Extremely high flow rates at low
pressure
Permanently hydrophilic
membrane
Fully integrity testable in water
High thermal and hydrolytic
stabiltity
Resistant to oxidizing agents
Rugged thermal bonded
construction
Biologically inert and non-toxic
Highly passive to protein
absorption
100% integrity tested during
manufacture
ultrabev® P-PF-BEV
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.
