Product description:
The UFK-W as an additional piece of
equipment after the compressor supports
an efficient and economical purification of
compressed air.
The cooler works in a counterflow pro-
cedure where the hot compressed air is
cooled down by eliminating heat over the
cooling tubes to the cooling water. The
generated condensate will be drained by a
cyclone separator.
In this product series are 11 different
housings available ranging from a volume
flow of 80 to 3000 cfm with fixed nest of
boiler tubes and 13 different sizes for a
volume flow of 175 to 6170 cfm with
removable nest of boiler tubes.
Features:
The Aftercooler can be delivered with fixed
nest of boiler tubes as well as with
movable nest of boiler tubes. Furthermore
are all aftercoolers equipped with a cyclone
separator. The coolers consist of enlarged
surface insertions made out of copper.
The shell, the pipes and the flanges are
made of steel.
Aftercooler for compressed air
and gases UFK-W, water-cooled
The aftercooler UFK-W is designed to cool compressed air,
but can be used for other gases as well.
inc. · · · ·
Technical alterations reserved (Date 1/99)
Technical data
Materials:
Housing
Steel
Cooler
Copper and brass
Shell, pipes and
Steel
flanges
Surface finish
Polyester powder
coating
Maximum operating temperature
300°F,
higher temperatures on request
Connection:
3/42 NPT
414 ANSI flange
Annotation:
The nominal volume flow is related to
70°F inlet temperature at 50% relative
humidity with a air outlet temperature of
250°F and a difference of the tempera-
ture between air outlet and waterinlet of
50°F.
Maximum operating pressure:
00800750
230 psig
10005000
170 psig
0300 Z0750 Z
230 psig
1350 Z5000 Z
170 psig
7000 Z8750 Z
145 psig
10500 Z
130 psig
UFK-W Aftercooler,
water-cooled
Aftercooler:
00805000
with fixed nest of
boiler tubes for
clean cooling water
0300 Z10500 Z
with moveable nest
of boiler tubes for
dirty cooling water
Please contact
Filter Products at 804-231-4646 to place an order or for more information about this product.